To Next PageTo Next PageWhat to do if Magnavox TV Converter Box remote is not working?
If your Magnavox TV Converter Box is not responding to the remote control, first ensure you are pointing the remote at the sensor on the box and that you're close enough. Remove any obstructions between the remote and the sensor. Check that the batteries are installed correctly (+ and -). If the batteries are depleted, replace them with new ones.
Why Magnavox TB100MG9 TV Converter Box has no audio or picture?
If you're experiencing no audio or picture with your Magnavox TV Converter Box, verify that the audio/video cables are correctly connected and undamaged. Ensure your TV is on and set to the correct viewing channel (ch3 or external input). Also, confirm that the “RF OUT” setting is correct.
How to fix Magnavox TV Converter Box when there is no power?
If your Magnavox TV Converter Box shows no power, make sure the AC power cord is securely plugged into the power outlet.
What to do if Magnavox TB100MG9 TV Converter Box has no reception?
If your Magnavox TV Converter Box has no reception, complete the autoscan in the “SETUP WIZARD” or “SETUP” menu. Keep in mind that the selected channel might not be available at the time, or some channels with a weak signal may not be received properly.
How to fix blocked noise on picture with Magnavox TB100MG9 TV Converter Box?
If you're experiencing blocked noise on the picture with your Magnavox TV Converter Box, ensure that the RF cable is connected correctly.
Why is the volume low on my Magnavox TV Converter Box?
If the volume is low on your Magnavox TV Converter Box, the sound volume differs depending on the audio out setting. Select “RF OUT” at step 5 in the “Initial Setup (Setup Wizard)”.
What to do if closed captioning won't turn off on Magnavox TB100MG9 TV Converter Box?
If the closed captioning display (TEXT mode) does not turn off even after changing channels through your Magnavox TV Converter Box, try changing the channel on your TV or turning the TV off and then on again.
Why is EPG wrong on my Magnavox TB100MG9 TV Converter Box?
If you are not getting an EPG or the information provided is wrong on your Magnavox TV Converter Box, ensure that “D.S.T” and “TIME ZONE” are set correctly.
Why does Magnavox TB100MG9 TV Converter Box screen go blank on startup?
This is a normal part of the start-up process and is not a malfunction.
General| Type | Digital TV Converter Box |
|---|---|
| Aspect Ratio | 4:3, 16:9 |
| Supported Resolutions | 480i, 480p, 720p, 1080i |
| Power Supply | AC 120V, 60Hz |
| Input | Antenna |
| Output | HDMI |
| Features | Closed captioning, Parental controls |
Read, retain, and follow all operating and safety instructions; clean with a damp cloth.
Ensures safe placement, ventilation, and adherence to electrical safety standards and cord management.
Covers lightning, power lines, object entry, and overloading risks to prevent damage.
Details servicing requirements, damage indications, and guidelines for replacement parts.
Guidelines for selecting a suitable location and ensuring adequate ventilation for the product.
Instructions to prevent electrical shock and fire hazards during operation.
Information regarding copyright, FCC warnings, and proper recycling of packaging materials.
Illustrates connecting the STB to a TV or other devices via different jack configurations.
Outlines the initial setup process including language, time zone, and channel scanning.
Explains how the STB converts ATSC signals to analog for analog TVs.
Lists the accessories provided with the Set Top Box, including remote and cables.
Step-by-step guide for inserting AA batteries into the remote control.
Identifies and describes the function of each button on the Magnavox remote control.
Details the remote control sensor and the power status indicator on the front panel.
Describes the AC power, audio, video output, and antenna jacks on the rear panel.
Illustrates connecting the STB to a TV lacking A/V jacks using an RF cable.
Shows how to connect the STB to a TV with A/V jacks using audio and video cables.
Provides instructions and diagrams for connecting the STB to an optional cable box.
Details how to connect the STB to DVD recorders or VCRs for audio and video output.
Instructions to power on the STB and select the correct viewing channel on the TV.
Guides the user through the on-screen setup wizard steps for initial configuration.
Configure language, audio output connection, and time zone settings within the wizard.
Select display mode and initiate channel autoscan for optimal performance.
Explains how digital broadcasting uses sub-channels for multiple signals on one main channel.
Step-by-step guide on how to enter main and sub-channel numbers to tune channels.
Allows selection of different audio languages if provided by the broadcast channel.
Instructions on how to freeze the image on the TV screen and how to cancel the mode.
How to display channel title, station name, signal strength, and ratings.
Guide to accessing and selecting programs from the electronic TV program guide.
Procedure for scanning and storing available digital channels for channel map.
Instructions on how to add or delete channels from the channel map manually.
Steps to add specific main and sub-channels to the STB's channel map.
Steps to remove unwanted channels from the STB's channel map.
How to check signal strength and adjust antenna direction for best reception.
Options to adjust the aspect ratio of digital TV programs for a 4:3 TV.
Instructions for setting the correct time zone and Daylight Saving Time for EPG accuracy.
Steps to turn DST ON or OFF to reflect the current time accurately.
Guide to creating or changing a password for V-chip parental control settings.
Options to select and block programs based on TV, MPAA, or Canadian rating systems.
Allows setting sub-ratings to block specific content elements like violence or language.
Procedure to set a new 4-digit password or change an existing one for V-chip access.
Instructions to set CC style to MANUAL and edit font, color, and size.
Guide to selecting the desired DTV closed caption service or turning it off.
Enables setting a timer for the STB to shut down automatically to conserve energy.
View analog TV by switching the RF OUT setting to 'RF THROUGH'.
View digital TV by setting RF OUT to CH3 and selecting CH3 on the TV.
View analog TV via external input without changing RF OUT setting.
View digital TV by selecting the external input channel on the TV.
Steps to set RF OUT to 'CH3' or 'RF THROUGH' for analog TV viewing.
How to switch RF OUT settings using the SETUP button and TV channel selection.
Diagnoses and remedies for common problems like no power, no audio/picture, and no reception.
Lists technical specifications including product type, tuner, connections, power, and dimensions.
Details the product warranty duration, coverage, exclusions, and service procedures.
