75 Series Currency Counter
23
Suspect Detection Codes
When a suspect detection code appears on the display you can
choose one of the below mentioned actions :
• Remove only the last note from the stacker then depress
the
0
CLR
key and continue counting. It is not necessary to
recount the entire batch if a suspect detection code
appears, however, the last note is not included in the
count.
OR
• Remove only the last note from the stacker then check the
note. To include the last note to the count after checking,
depress the
+
ACCM
key and put it back in the stacker.
Error Code Corrective Action
CF Magnetic ink cannot detected/(A)Press
(75MD/75UMD/75SM/75SUM) CLR key to restart.
(B)To turn this function off while "CF" error
code is appeared on the display, press M key
again.
UE Ultraviolet detection/Counterfeit note
(75UD/75UMD/75SU/75SUM) Detected/(A)Press CLR key to restart.
(B)To turn this function off while "UE" error
code is appeared on the display, press U key
again.
dS1 Stops on notes of different lengths/
75D/75UD/75MD/75UMD (A)Press CLR key to restart.
75S/75SU/75SM/75SUM (B)To turn this function off while "dS1" error
code is appeared on the display, press D(S key
when in S mode) key again.
dS2 Stops on notes of different widths/
(75S/75SM/75SU/75SUM) (A)Press CLR key to restart.
(B)To turn this function off while "dS2" error
code is appeared on the display, press S key
again.
To Next Page
Loading...
