Need help?Do you have a question about the Magnet-physik FH 55 and is the answer not in the manual?
General| Resolution | 0.01 mT |
|---|---|
| Accuracy | ±1 % |
| Frequency Range | DC |
| Power Supply | 9V battery |
| Display | LCD |
| Storage Temperature | -20°C to 60°C |
Explains warning signals for injuries and property damage.
Defines the FH 55's specific use and prohibited applications.
Specifies requirements for personnel using the FH 55.
Outlines steps to take in case of emergency.
Step-by-step guide for connecting power, probe, and initial zeroing.
Critical instructions for handling probes to prevent damage and ensure accuracy.
Procedure for zeroing the probe to eliminate offsets.
Setting optical signals for measured values within or outside defined limits.
Instructions for connecting and disconnecting probes.
Critical instructions for handling probes to prevent damage and ensure accuracy.
Guidance on selecting appropriate probes based on application and sensitivity.
Factors affecting accuracy, including zeroing and temperature effects.
Schedule for checking instrument for damages and calibration.
Recommendations for yearly calibration of the FH 55 and probes.
Steps to resolve common issues like instrument not switching on or probe missing.
To Next Page
