8.6 Accessories
• Magnetic shielding chamber NK 1 (included with instrument). Used for the Zero
adjustment of standard probes
• Large magnetic shielding chamber NK 4065 (optional). Used for the Zero adjustment
of high sensitivity probes
• Operating instructions FH 55 Gauss-/Teslameter, German
• Operating instructions FH 55 Gauss-/Teslameter, English
• HS-TGB5-104005, standard transverse probe
• HS-AGB5-4805, standard axial probe
• Other Hall probes: ask for data sheets or refer to www.magnet-physik.de
8.7 Taking Out of Operation ation
To shut down operation of the FH 55 switch the device off and store it as per storage
instructions to facilitate operation again at a later date. It is advisable to register the date of the
last operation.
Important!
To prevent any possible environmental pollution or violation of environmen-
tal regulations, only a specialized company should carry out disposal.
To Previous Page
