1 General Information
The magnetic field strength meter FH 55 is a compact benchtop instrument for measuring the
magnetic field strength H in Ampere per Meter (A/m) and the magnetic flux density or
induction B in Tesla (T) or Gauss (G). Particular features of the FH 55 are high accuracy, easy
handling and a multitude of functions.
1.1 Safety Instructions
Special warning signals, whose non-observance may lead to injuries and/or property damage, as
well as important tips are indicated in these operating instructions as follows:
Danger!
means that serious bodily injury resulting in death or considerable material
damage may occur if the appropriate safety measures are not taken.
Caution!
means that light bodily injury or material damage may occur if the
appropriate safety measures are not taken.
Important!
Indicates important information which is to be paid particular attention.
Important!
It must be explicitly stated that the field strength meter FH 55 is to be used
only for its intended purpose.
The intended purpose of the FH 55 is the measurement of the magnetic
field strength or flux density of static, periodically alternating or pulsed
magnetic fields.
Every application not in accordance with this intended purpose is absolutely
prohibited and implies the deliberate dealing with non-calculable risks for
both the operator as well as the equipment.
Unauthorized reconstruction of and/or alterations to the equipment are
strictly forbidden!
The instructions as stipulated in this operating manual for operation and installation are to be
strictly observed!
To Next Page
