2 Transport and Installation
2.1 Unpacking and Checking
Check the packaging for signs of damage. Any correspondence regarding damage (evident or
hidden) or partial loss of the consignment must be made in written form immediately after
receipt of goods. Also inform the freight forwarder immediately.
Open the packaging. A packing list is enclosed which enables you to check that the ordered
device and accessories have been received. Use the packing list to check that all parts of the
device have been unpacked. Check them for damages. Make sure everything has been removed
before discarding the packaging.
If the device has been damaged in transit, make sure the forwarder and insurance are informed.
Inform Magnet-Physik of the same. If there are parts or accessories missing, let Magnet-Physik
know immediately. Magnet-Physik cannot accept responsibility for any missing parts if not
informed within 60 days from date of dispatch.
Important!
Check on receipt of goods and before taking the device or accessories into
operation whether they show visible signs of damage. The device must
otherwise not be put into operation before being cleared by an authorized
person.
2.2 Transport and Storage
Always use suitable packing or containers for transport and storage, so that damage is avoided.
If possible, the original packing should be used for dispatch.
Due to their fragility, most probes are dispatched in special covers or foamed packaging. The
same packaging should be used for storage and when the probe is shipped for calibration or
repair.
Do not store the device in places where one or more of the limiting values for the ambient
conditions are exceeded.
2.3 Technical Data
Table 1 : Ambient Conditions
To Next Page
Loading...