Need help?Do you have a question about the Magnetek Flex 12EX2 and is the answer not in the manual?
Frequency Specifications| frequency range | 433.050MHz - 439.600MHz |
|---|---|
| number of channels | 62 channels |
| channel spacing | 50 KHz |
Transmitter Specifications| transmitting range | >100 meters |
|---|---|
| transmitting power | 1.0 mW |
| transmitter operating voltage | 3.0VDC |
Receiver Specifications| receiver sensitivity | -116 dBm |
|---|---|
| receiver power consumption | 22VA (max) |
| available receiver voltages | 9 - 36VDC, 24VAC, 42VAC, 48VAC, 110 - 120VAC, 220 - 240VAC, 380 - 400VAC, 410 - 460VAC |
Physical Dimensions and Weight| transmitter dimension | 244 mm (L) x 70 mm (W) x 44 mm (H) |
|---|---|
| receiver dimension | 260 mm (L) x 204 mm (W) x 83 mm (H) |
| transmitter weight | 341 g / 12.0 oz |
| receiver weight | 3.15 kg / 6.9 lb |
Environmental Specifications| operating temperature | -25°C - 75°C / -13°F - 167°F |
|---|---|
| enclosure type | NEMA4 |
| enclosure rating | IP66 |
Essential safety warnings and requirements before installing the equipment.
Guidelines on who is permitted to operate radio-controlled cranes and equipment.
Recommended knowledge, skills, and duties for radio-controlled equipment operators.
Steps to perform before operating the equipment for safety checks.
Safety precautions for handling, charging, and disposing of batteries.
Configuration for firmware, channels, pairing, power, buttons, and sensor settings.
Configuration for channels, output relays, dipswitches, jumpers, voltage, and scanning.
Basic steps for powering on, operating, and shutting down the transmitter and receiver.
To Next Page
