Magnetek FLEX EX2 Charging Instructions

Pa
g
e 2
3) Make sure the marking on the charging plug (see below) is facing the top side
when connecting.
4) The transmitter is designed to accept any off-the-shelf Ni-MH rechargeable
batteries. Depending on the battery capacity the average charging time is
approximately 1.5 hours from completely drained to fully charged. Constant red
on the LED represents charging in progress, constant green represents batteries
fully charged, and LED off represents no batteries detected. Please do not use
any rechargeable lithium ion batteries as it will damage both the transmitter and
the charging station.

Magnetek FLEX EX2 Specifications

General

Protection Rating	IP66
Dimensions	Varies by model
Weight	Varies by model
Battery Type	AA Alkaline
Operating Temperature	-20°C to +55°C
Enclosure	Plastic
Battery Life	Up to 100 hours