Magnetek Impulse VG+ series 4 Product Guide

IMPULSE®•G+ & VG+ Series 3 to Series 4 Transition Guide August 2011
Page 11 of 54
Magnetek, Inc.
Product Transition Guide
IMPULSE
®
•G+ & VG+ Series 4
RP RP Multi-Function Pulse Train Input
0 to 32kHz (3k) +5%
High level voltages
3.5 to 13.2
Low level voltages
0.0 to 0.8
Duty Cycle (on/off)
30% to 70%
Input Freq.: 0 to 32 kHz
Duty Cycle: 30 to 70%
High level: 3.5 to 13.2
VDC
Low Level: 0 to 0.8 VDC
Input Impedance: 3kΩ
MP MP
Pulse train output (Output
frequency)
0 to 32kHz
±5% output
(load: 1.5k)
32 kHz (max)
FM FM MFAO 1 (Output frequency)
0 to ±10VDC Max.
±5% 2mA or less
4 to 20 mA
-10 to +10V, 2mA
0 to +10V, 2mA
4 to 20 mA
AC AC Analog Common -- --
AM AM MFAO 2 (Output current)
0 to ±10VDC Max.
±5% 2mA or less
4 to 20 mA
-10 to +10V, 2mA
0 to +10V, 2mA
— H1 Safe Disable input 1 -- 24 VDC, 8mA
Internal Impedance:
3.3kΩ
— H2 Safe Disable input 2 --
— HC Safe Disable common --
— DM+ Safety monitor output -- 48 VDC, 8mA
— DM- Safety monitor output common -- --
R+ R+ Receive (+)
Differential input, PHC
isolation
RS-485/422 Line Driver
115.2 kbps (max)
R- R- Receive (-)
S+ S+ Transmit (+)
Differential output, PHC
isolation
S- S- Transmit (-)
IG IG Shield connection -- --
Control Terminals
Function
Signal Level
G+ Series 3 G+ Series 4 G+ Series 3 G+ Series 4

Magnetek Impulse VG+ series 4 Specifications

General

Brand	Magnetek
Model	Impulse VG+ series 4
Category	Controller
Language	English