Description
32 D1 0223TH1-GB01
2.8.3 Connector X3
Internal: Debugger
2.8.4 Jumper J1, J2
J1 Service pin
J2 Service pin
If the pin is bridged at reset (switch on) an
internal self-test is conducted. Hereby all 10
LEDs and the complete DOT-Matrix are
switched on.
2.8.5 LEDs VD42 bis VD45
VD42 VD25 Service LED
VD43 VD26 Service LED
VD44 VD27 Service LED
VD45 VD28 Service LED
2.8.6 LEDs VDxx bis VDxx
LED 1…4 Green
LED 5…6 Orange
LED 7…10 Red
Differential display %
LED 11 For front axle
LED 12 For parking brake
LED 13 For rear axle
LED 14 For printing
LED 15 For deleting
LED 16 For side-slip test "+"
LED 17 For side-slip test "–"
LED 18 For shock absorber test
LED 19 For reception confirmation of remote control
To Next Page
