89
35 Series-HST, Model - 3535, 4035, 4535 & 5035
Specifications
MAHINDRA – 4535 HST
Note : Roll over protection structure is standard fitment on all tractors.
Note : Specifications and design subject to change without notice.
Dimensions are in inch and based on Industrial 12 x 16.5 front tires and 16.9 x 24 rear tires.
* Manufacturer's estimate under standard condition and subject to change without prior notice.
73.7
Note :- One US gallon = 4 quarts.
75
128.9
98.7
DIMENSIONS
Length overall : 128.9 in.
Width overall : 73.7 in.
Height overall upto ROPS : 98.7 in.
Wheel base : 75 in.
TREAD ADJUSTMENT
Front ( Industrial ) : 52.9 in. to 56 in.
Rear ( Industrial ) : 56.3 in. to 59.8 in.
OPERATING WEIGHT (APPROX.)
Basic tractor including fuel, oil coolant, hydraulic system,
3 point linkage, transmission, P.T.O., lighting and
standard wheel sizes.
WEIGHT DISTRIBUTION *
(when measured without optional weights fitted)
Front weight : 1782 lbs.
Rear weight : 2695 lbs.
Total weight : 4477 lbs.
TIRES
Front ( Industrial ) : 12 x 16.5, 6 Ply
Rear ( Industrial ) : 16.9 x 24, 8 Ply
TURNING RADIUS (MINIMUM)
With brakes : 120 in.
Without brakes : 140 in.
TIRE 16.9 x 24 Industrial
Gear Forward Reverse
Low 3.2 3.2
Medium 8.0 8.0
High 15.5 15.5
CAPACITIES US Gallons Quarts
Fuel Tank 11.36 45.44
Cooling System 1.85 7.4
Engine Oil 2 8.03
Transmission 10.03 40.12
Front Axle 2.24 8.96
SPEEDS :
Speed chart in mph.
To Next Page
Loading...
Need help?
General
