Need help?Do you have a question about the Mahr Federal Maxum III and is the answer not in the manual?
General| Brand | Mahr |
|---|---|
| Model | Federal Maxum III |
| Category | Measuring Instruments |
| Language | English |
Details the indicator's features like switchable units, tolerance limits, and range signal.
Explains how to switch the indicator's display between inch and metric units.
Details the procedure to change the measuring direction polarity (Normal or Reverse).
Describes how to select between standard and reduced digital ranges.
Explains how to change the digital resolution settings for the indicator.
Guides on setting up the analog fan scale and choosing overlays.
Details how to select the data output format (Standard, Digimatic, ASCII, Off).
Describes the traditional static measuring mode and its display indicators.
Explains the dynamic measuring mode and its display characteristics.
Provides instructions for disassembling and replacing the unit's battery.
Details the procedure for checking the indicator's measurement accuracy.
Guides on cleaning the measuring spindle if it does not move freely.
Explains the process for calibrating the indicator's digital gain.
Lists contact points and other replacement parts for the indicator.
Describes the standard digital output format, clock signal, and data stream.
Details the ASCII serial byte communication format for electronic devices.
Explains the clocked serial BCD data stream format for printer/computer transfer.
To Next Page
