To Next PageTo Next Page
Need help?Do you have a question about the Majestic 36BDVT and is the answer not in the manual?
Installation and service must be performed by a qualified installer, service agency or the gas supplier.
Steps to take if you smell gas, including calling the gas supplier or fire department.
Crucial safety warnings regarding high temperatures, supervision, modification, cleaning, and clearances.
Guidance on selecting a safe and appropriate location for the fireplace installation.
Provides specific measurements for the fireplace unit.
Provides specific measurements for framing the fireplace unit for installation.
Specifies required clearances from the fireplace to combustible materials.
Guidelines for installing mantels and hearths around the fireplace.
Instructions for framing and finishing the fireplace installation.
Details on gas input ratings, pressures, and high elevation adjustments.
Instructions for connecting the gas supply line to the fireplace.
Instructions for installing a remote ON/OFF switch for the gas fireplace.
Details on wiring the EB-1 electrical junction box for optional fan kit connection.
Instructions for installing a remote ON/OFF switch for electronic ignition units.
Overview of venting options and general guidelines.
Guidelines for choosing a safe and unobstructed location for the vent termination.
Table specifying clearances for vent termination in Canada and the USA.
Comparison of venting clearance requirements between Canadian and US installations.
Details clearances for various termination configurations like corners and recesses.
Instructions for assembling vent pipes according to Canadian and US codes.
Details on joining CFM twist-lock pipes, including sealant and screw recommendations.
Explains how to use the vent graph to determine vent system dimensions.
Explains vent graph use for vertical sidewall installations and clearance rules.
Locate and cut the vent opening in the wall based on material type.
Calculation examples for maximum horizontal vent length with elbows.
Measure and assemble the zero clearance sleeve for combustible walls.
Measure and install horizontal vent sections, ensuring overlap and sealing.
Apply sealant and secure vent termination, ensuring weatherproof sealing.
Instructions for below-grade installations using snorkel kits and required clearances.
Details on approved vertical installations, horizontal runs, and elbow usage.
Guidelines on using elbows and their impact on vent length.
Instructions for fitting the restrictor plate to the 33BDVT model.
Instructions for installing the vent system through the roof, including firestop placement.
Steps for installing roof supports, flashing, and sealing.
Specifies the minimum clearance required for vent termination above the roof.
Lists various twist lock venting components like elbows, pipes, and spacers.
Guidelines for approved glass, handling, and cleaning procedures.
Instructions for removing louvre panels and the window frame assembly.
Instructions for installing logs, lava rock, and ember material.
Chart and diagrams for identifying and placing logs for different models.
Diagram and instructions for placing logs for the 39BDVT model.
Diagram and instructions for placing logs for the 43BDVT model.
Information on checking pilot and burner flame appearance against pictograms.
Critical safety warnings and instructions before lighting the fireplace.
Step-by-step guide for lighting the pilot/burner and turning off the gas.
Essential safety warnings before operating the appliance.
Procedures for lighting the pilot/burner and turning off the gas for SIT822 valves.
Flowchart for troubleshooting Honeywell millivolt valve issues.
Key checkpoints for diagnosing millivolt valve problems.
Troubleshooting guide for SIT NOVA 820 millivolt valves.
Lists potential causes and solutions for gas control system symptoms.
Troubleshooting steps for SIT 822 valves with Honeywell electronic ignitors.
Instructions for converting the appliance between LP and Natural Gas.
Steps for converting pilot assemblies and gas control valves.
Guidance on cleaning the burner compartment and fan assembly.
Steps for cleaning and maintaining the standing pilot control system.
Visual representation of log placement for the 33BDVT model.
Visual representation of log placement for the 36BDVT model.
Visual representation of log placement for the 39BDVT model.
Visual representation of log placement for the 43BDVT model.
Part numbers for log sets and burner housing assemblies.
Part numbers for pilot assemblies and gas valves.
Part numbers for fan controls, window frames, and louvre assemblies.
Part numbers for restrictor plates and other miscellaneous components.
Details on the FK24 fan kit for improved circulation and heat sensing.
Information on the FK12 fan assembly for fixed-speed circulation.
Instructions for wiring and installing ceramic refractory kits.
Information on the optional front window screen for specific models.
Information on bay window kits and their installation.
Details on bay window screens and optional remote control units.
Full warranty terms, including basic, extended, and component coverage.
Conditions for warranty validity, including installation and non-transferability.
Table showing EnerGuide fireplace efficiency ratings, steady state, and D.O.E.
General| Style | Traditional |
|---|---|
| Fireplace Type | Insert |
| Fuel Type | Natural Gas or Propane |
| Glass Front | Yes |
| Remote Control | Optional |
| Ignition | Electronic |
| Type | Fireplace |
| BTU Output | 36, 000 BTU |
| Vent Type | Direct Vent |
| Venting | Direct Vent |
| Efficiency | 70% |
