Name: Major tech MT350
Brand: Major tech
Rating: 4 (1 reviews)

To Next Page

To Previous Page

8. BATTERY REPLACEMENT

1. When the low battery symbol " " appears on the LCD, the six 1.5V 'AA'

batteries must be replaced.

2. Turn the meter off and remove the test leads

3. Unsnap the tilt stand from the rear of the meter

4. Remove the four Phillips head screws holding the battery cover

5. Remove the battery compartment cover

6. Replace the batteries observing polarity

7. Affix the rear cover and secure the screws.

8. Reattach the tilt stand

Questions and Answers:

Need help?

Do you have a question about the Major tech MT350 and is the answer not in the manual?

Major tech MT350 Specifications

General