15
2. The replacement temperature adaptor (with banana plug) is part number
MT802.
8. Maintenance
1. Periodically wipe the case with a damp cloth and mild detergent; do not
use abrasives or solvents. If the meter is not to be used for 60 days or
more, remove the battery and store it separately.
9. Cleaning and Storage
WARNING: To avoid electrical shock, disconnect the meter from any
circuit, remove the test leads from the input terminals, and turn OFF the
meter before opening the case. Do not operate the meter with an open
case.
1. Rotate battery door lock 180 degrees to open the battery door
2. Open the battery compartment
10. Battery Replacement
3. Replace the 3 x 1.5V AAA battery
4. Secure the battery compartment
11. Temperature Probe Replacement
1. The replacement bead wire probe (with K-Type plug) is part number
MT660.
To Next Page
Loading...
Need help?
General
