6
Close the battery compartment cover.
Connection and Preparation
Connect the power adaptor to the back of device and plug it into power socket. It
starts up after switching on the device.
Connecting the network
• A broadband connection in combination with a wireless access point, router
or similar network device.
• The network device needs to support WiFi (802.11 a/b/g/n) wireless
connection.
Make sure you have setup the wireless network and you have the WEP, WPA or
WPA2 security password to activate the connection. You may also use the WPS
(WiFi Protected Setup) function for easy pairing between the network device and
the radio. Check if the light indicators on the network device are in appropriate
status.
Antenna
Plug the antenna to the F-connector. To get good reception for DAB/FM
broadcasting, always extend the antenna with its full length.
First Time Setup
When powering the device on for the first time, first you need to set language.
Selecting the menu language
Rotate the knob to select the menu language you want from the list and press OK
button to confirm.
To Next Page
Loading...
Need help?
General