MAJORITY BOWFELL - RCA Input

10
EN
You will need: An audio source with an RCA Output and an RCA cable
(included)
Connect the RCA cable to the RCA output on the audio source and to
the Line in (AUX2) on the speaker bar (Ref.).
Press the POWER/MODE button on side panel (Ref.) or POWER button
directly on the remote control (Ref.) to switch on the unit.
Press the POWER/MODE button on the remote control or the main
unit (Ref./Ref.) repeatedly to select the LINE IN mode. The mode
indicator LED will turn GREEN.
Using the native controls on your connected device, make sure the
audio settings are set to Analog stereo output/RCA/Audio output and
are turned On.
Audio from the connected audio source will now be played through the
speakers.
Using the RCA Input
Rear view of the unit
RCA stereo audio cable
Instructions Guide