11
EN
Instructions Guide
Plug one end of a 3.5mm audio input cable (included) into the Line in
on the unit (Ref.).
Plug the other end of the cable into the audio output/headphone
output on an MP3 player or other audio source.
Press the POWER/MODE button on side panel (Ref.) or POWER button
directly on the remote control (Ref.) to switch on the unit.
Press the POWER/MODE button(Ref./Ref.) repeatedly to enter LINE
in mode. The mode indicator will turn GREEN.
Audio played through the connected device will now be heard through
the speakers.
Side view of the unit
Audio device
3.5mm to 3.5mm
audio cable
Using the MP3 LINK Connection (Line In)