12
EN
Instructions Guide
Ensure that the power supply voltage has a voltage of between
100V~240V.
This unit is designed to use an adapter.
Connecting the unit to any other power source may cause damage to
the unit.
Unwind the mains cable to its full length. Connect the mains plug to a
mains socket. Make sure the mains plug is fully inserted into the mains
socket.
The mains plug/appliance coupler is used as the disconnect device, the
disconnect device must remain readily operable.
Connect the Adapter to the unit and AC Socket.
Ensure all audio connections of the unit are connected before connecting to the
mains power socket.
Unplug the power cord from the outlet when the unit is not in use for an
extended period of time.
ATTENTION
RISQUE D’ELECTROCUTION
NE PAS OUVRIR
!
Connecting to the Mains Supply
To Next Page
Loading...
