MAJORITY BOWFELL - Bluetooth Operation; Pairing a Bluetooth Device

13
EN
Instructions Guide
Pairing a Bluetooth Device for the First Time
Press the POWER/MODE button on the unit (Ref.) or the POWER
button on the remote control (Ref.) to switch on the unit.
Select and press the MODE directly on the remote control (Ref.) or
press the POWER/MODE button repeatedly on the soundbar (Ref.) to
enter Bluetooth mode, indicated by a ashing blue light.
Using the native controls on your Bluetooth device, select the “Majority
Bowfell” in your Bluetooth settings to pair.
If your device requests a password, enter the default “0000”. Refer to the
“user manual” for your specic device for instructions on pairing and
connecting Bluetooth devices.
When successfully paired and connected, a beep will issue from the
unit and the Pairing Indicator will display a solid blue light. After initial
pairing, the unit will stay paired unless unpaired manually by the user,
or until it is erased due to a reset of the device.
If the soundbar is Bluetooth connected to a device, you can press the
PAIR button for 3 seconds to exit this device in order to pair the device
with another Bluetooth device.
If your device should become unpaired or you nd it is unable to
connect, repeat the steps above.
Bluetooth Operation