6
Press the ‘Mode’ button (Ref.4) to switch to DAB Radio. On rst
use it will automatically scan all stations and save them.
Fully extend the antenna (Ref.13).
To auto scan, press the ‘Scan’ button (Ref.5) and then release.
This will start scanning up the frequency band and store all
stations that have a good signal.
The radio will automatically save all the stations with a strong
signal, up to 240 MHz.
After searching has nished it will automatically play the rst
station stored.
To listen to all stations that have been stored use the
‘Next’(Ref.9) and ‘Prev’ buttons (Ref.8) to scroll through them,
press the ‘Enter/Snooze’ button (Ref.12) when on required
station.
The radio will display station information when you press the
‘Info/Menu’ button (Ref.6). Press it multiple times to view all
information. Please see page 10 for further details.
When you turn on the radio again after it switching o, it will
automatically tune to the same station (DAB or FM) that was last
selected.
DAB Radio
Instrucons Guide
To Next Page
Loading...
Need help?
General