How to set time and date on my MAJORITY Radio?
To set the time and date automatically on your MAJORITY Radio, turn on the system and switch to DAB radio and let it scan. Then press the ‘Power Mode’ button, and the radio will go into standby. The date and clock will then update automatically.
How to fix no sound on my MAJORITY SHELFORD II SEL-DAB-CRM-2 UK?
If your MAJORITY Radio has no sound, first, ensure the station is properly tuned. If not, fine-tune it. Second, check the volume level and increase it if it's too low. Finally, make sure headphones are disconnected, as they may be diverting the sound.
Why is my MAJORITY Radio making static noises?
If your MAJORITY Radio is experiencing static on FM or burbling/intermittent cut-out on DAB, the signal reception is likely weak. Try adjusting the aerial or moving the unit to a location with a stronger signal. You may also need to re-scan for stations.
What to do if my MAJORITY SHELFORD II SEL-DAB-CRM-2 UK Radio sound is distorted?
If the sound from your MAJORITY Radio is distorted, the volume may be set too high. Try adjusting the volume control to a lower level.
To Next Page
General