5
Please note all (Ref.) refer to Page 1 Controls and Functions mapping guide.
Instrucons Guide
Plug the connector into the back of the system labelled DC 5V
(Ref.12) and the power supply into the mains. Alternatively,
insert 4 x C batteries into the battery compartment for
portability.
Ensure the antenna (Ref.14) is extended as far as possible so that
you can rotate it. This will enable you to get the best signal you
can. At the back of the radio, switch the ON/OFF toggle to “ON”
(Ref.10).
Press the ‘Standby/Mode’ button to turn on the unit (Ref.1).
When DAB Radio is activated for the rst time, you may need
to scan for available stations if scanning does not automatically
start. To do this, press the ‘Scan/Snooze’ button (Ref.2) for the
scan to start. To scroll through the stations, use the ‘Previous’ or
‘Next’ (Ref.5/6) buttons. Press the ‘Enter’ button (Ref.9) to listen
to a station.
In DAB mode, the radio will synchronize with the time and date
of the station.
To change the mode, press the ‘Standby/Mode’ button (Ref.1).
Standby
To switch your radio to Standby mode, press and hold the
Standby/Mode button. To turn on the radio, simply press the
Standby/Mode button.
Support
Thank you for your purchase of the Majority Shelford II.
Please follow the guidance of the manual to set up your radio
and enjoy its fantastic variety of stations and features.
If you require further assistance with your new radio,
please contact our support team on the Majority website:
https://www.majorityradios.co.uk/support/
To Next Page
Loading...
Need help?
General