IMPORTANT
DAB Radio Mode
4
DAB Radio
• Press and hold the ‘Standby/Dimmer’ button (Ref.12).
• Pull up the antenna (Ref.17).
• Then press the ‘Mode’ button (Ref.7) to choose your options. Choose “DAB” if not already in this mode.
• The system will auto-scan on first use, but if you wish to re-scan press the ‘Scan’ button (Ref.13) and then release.
• The radio will automatically save all the stations with a strong signal.
• After searching has finished it will automatically play the first station stored.
• If there is no signal then “No Signal” will be displayed.
• To listen to the tuned in stations press ‘Next’ (Ref.16) to search forward and ‘Prev’ (Ref.14) to search back.
• In DAB Mode, the radio will synchronize with the time and date of the station.
• In DAB Mode press the ‘Info’ button (Ref.8) multiple times to display Dynamic Label Segment (Supplementary data service in text
form), station name, time and date, frequency, bit rate or signal quality.
IMPORTANT NOTE: PLEASE MAKE SURE YOU HAVE EXTENDED THE ANTENNA TO ITS FULL LENGTH (Ref.17).
THIS WILL ENABLE YOU TO ROTATE IT TO GET THE BEST SIGNAL.
To Next Page
Loading...
Need help?
General