Make Noise Strega - Panel Controls and Outputs; Activation Circuits; Activation CV Controls

Panel controls, Inputs and Outputs
13
Panel controls, Inputs and Outputs
Activation: the Strega Tones are activated and added to the Time/ Filter experiment using these circuits. Keep in
mind that External audio substances must be activated at their sources.
1. Activation Interference Control: sets amount of influence from Time/ Filter allowing that experiment to
influence activation and therefore itself.
2. Activation Constant Control: sets continuous addition of Strega Tones into Time/ Filter.
3. Activation CV Attenuvertor: bi-polar attenuator for the Activation CV In.
4. Activation CV In: Patch control signals here for activation of Strega Tones from external sources or the CV
sources contained within Strega such as CV1, CV2 and Cycle. Direct coupled, range +/-5VDC.