Make Noise Strega - Beginning the Strega Experiment (cont.); Tonic and Tones Controls; Time and Blend Controls

8
Beginning the Strega Experiment (cont.)
Adjust the Tonic so the Strega Tones are lower in pitch and set the Tonic Modulation Interference control
full CCW so there is no interference. Adjust the Tones control through its entire range so you could formulate
some idea of the different tones available for experimentation. Set the Tonic control so the Strega tones are
higher in pitch and slowly sweep the Tones control from Full CCW to Full CW so you may hear all the Tones
again.
Tonic Modulation Interference ->
Time Modulation ->
Set the Time Modulation full CCW and Blend control Full CW, and sweep the Time control through the
entire range so you land at around 9:00. You should hear an avalanche of noise and Strega Tones. Turn the
Tonic control a very small amount CCW to create a change in the pitch of the Strega Tones.