Makeblock mBot Servo Pack User Manual

mBot Servo Pack
www.makeblock.com
D2.1.9_7.40.3637
For more add-on packs please visit:
http://learn.makeblock.com/en/mbot-add-on-packs/
For more information, please scan the QR code
bellow with your smart device:
If you have any questions or concerns about our products,
please do not hesitate to contact us!
Makeblock Co., Ltd.
Technical support: www.makeblock.com/support
Tel: +86(0)755-26392228
Address: 4th Floor, Building C3, Nanshan iPark, No.1001 Xueyuan Avenue,
Nanshan District, Shenzhen, Guangdong Province, China 518055
+Makeblock @Makeblock @Makeblock

Makeblock mBot Servo Pack Specifications

General

Operating Voltage	4.8V - 6V
Rotation Angle	180°
Control	PWM
Connector Type	RJ25
Compatibility	mBot
Stall Torque	1.6kg/cm (4.8V)
Speed	0.12s/60° (4.8V), 0.10s/60° (6V)

Summary

mBot Servo Pack Construction Knowledge

1. Adjust Servo

Guides on adjusting the servo's rotation angle using various software tools.

2. Install Parts to Servo

Instructions for attaching components to the servo arm using screws.

3. Controlling and Programming

Explains how to program the mBot using mBlock or Makeblock App.

Dancing Cat Add-on Pack

mBot Servo Pack- Dancing Cat Assembly

Detailed instructions for assembling the Dancing Cat add-on pack for the mBot robot.

Head-Shaking Cat Add-on Pack

mBot Servo Pack- Head-Shaking Cat Assembly

Step-by-step guide to build the Head-Shaking Cat add-on for the mBot robot.

Light-Emitting Cat Add-on Pack

mBot Servo Pack- Light-Emitting Cat Assembly

Instructions for assembling the Light-Emitting Cat add-on pack for the mBot robot.