To Next PageTo Next Page
Need help?Do you have a question about the Makeblock mBot and is the answer not in the manual?
General| Certification | CE |
|---|---|
| Product color | Black, Blue |
| Volume control | Yes |
| Compatibility | mBot v1.1 |
| Brand compatibility | Makeblock |
| Package depth | 149.86 mm |
| Package width | 59.94 mm |
| Package height | 100.08 mm |
| Package weight | 250 g |
| Number of batteries supported | 4 |
Connect a Makeblock robot to the mBlock software using a USB cable.
Steps to update the robot's firmware using the mBlock software.
Procedure to restore the robot's factory default program via mBlock.
Guide on transferring custom programs from mBlock to the robot.
Explains the distinction between firmware updates and factory resets.
Troubleshooting why the robot fails to move at low motor speed settings.
Compares different connection methods for Makeblock robots and mBlock.
Steps to resolve connection issues between the robot and its mobile application.
Instructions for replacing a broken motor shaft on the mBot robot.
Troubleshooting the Ultrasonic Obstacle Avoidance Mode on mBot.
Troubleshooting the Line Follower Mode functionality on mBot.
Steps to establish a 2.4G wireless connection between mBot and mBlock.
Adjusting mBot's speed using the IR remote controller.
Common questions and information regarding the robot's battery.
A collection of helpful links for mBot users, including downloads and tutorials.
Troubleshooting motor issues on the Ranger robot.
Determining compatibility of 2.4G wireless modules with the Ranger.
Troubleshooting object avoidance failures on the Ranger robot.
Steps to fix balance issues with the Nervous Bird robot.
Troubleshooting Bluetooth connectivity for Ranger with mobile apps.
Resolving 'synchronization fails' errors in the Makeblock App.
Troubleshooting why the Ranger starts moving immediately upon power-on.
Troubleshooting the line follower sensor functionality on the Ranger robot.
Troubleshooting motor issues on the Starter robot.
Compares the IR and Bluetooth versions of the Starter robot.
Guide on operating the Starter robot using its IR remote controller.
Assessing the possibility of using a 2.4G module on the Starter instead of Bluetooth.
Troubleshooting Bluetooth connectivity for the Starter with mobile apps.
Troubleshooting the Ultrasonic Obstacle Avoidance Mode on the Starter.
Diagnosing bootloader issues on the Starter main board.
Information and recommendations regarding the Starter robot's battery.
Programming the Robotic Arm add-on for the Starter robot.
Troubleshooting motor issues on the Ultimate 2.0 robot.
Troubleshooting Bluetooth connectivity for Ultimate 2.0 with mobile apps.
Compatibility of 2.4G wireless modules for controlling the Ultimate 2.0.
Steps to fix balance issues for the Ultimate 2.0 self-balancing robot.
Information and recommendations regarding the Ultimate 2.0 robot's battery.
Troubleshooting why Ultimate 2.0 begins moving upon power-on.
Testing X and Y axis wire connections for the LaserBot.
Procedure to test the LaserBot's laser module for faults.
Troubleshooting LaserBot X/Y axis overtravel issues.
Fixing issues where X or Y axes do not move during homing.
Troubleshooting image scaling issues on the LaserBot's X or Y axis.
Resolving missing serial port issues for LaserBot on macOS.
Guide to setting the mLaser language to English.
Troubleshooting a black interface issue in mLaser software.
Resolving 'damaged app' errors for mLaser on macOS.
Troubleshooting LaserBot when laser is on but not cutting/engraving.
Troubleshooting abnormal operation of XY Plotter stepper motors.
Troubleshooting issues with drawing incorrect pictures on the XY Plotter.
Troubleshooting abnormal behavior during XY Plotter homing tests.
Troubleshooting weak or non-operational laser on the XY Plotter.
Troubleshooting why the laser cutter produces discontinuous lines.
Troubleshooting issues with the Pen-up and Pen-down mechanism.
Key considerations when switching software from mDraw to Benbox.
