73
What should I do if the self-balancing robot could not keep
balanced?
When you find the Ultimate 2.0 -- Self-Balancing Robot cannot keep balanced, please refer to
below steps to check:
1. Make sure you did follow the guidance strictly to assemble the self-balancing robot. In
Ultimate 2.0 package, there are 3 motors, remember to use the two 9V/185RPM motors. Here is
the guidance of self-balancing robot, including assembling video:
https://openlab.makeblock.com/topic/5729b96b591c0ad43a4764b2
2. Make sure power is enough as self-balancing robot requires to be working with full power. If
you are sure assembling is perfect but it still fails to be balanced, please do insert 6 totally new
batteries in. This is very important.
3. Make sure the Gyro module is working properly. You can write a simple program to test the
module.
To Next Page
Loading...
