Need help?Do you have a question about the MakerBot Replicator+ and is the answer not in the manual?
General| Nozzle width | 0.4 mm |
|---|---|
| Print technology | Fused Deposition Modeling (FDM) |
| Printing material | Polylactic acid (PLA) |
| Layer thickness (max) | 0.3 mm |
| Layer thickness (min) | 0.1 mm |
| Number of printing colors | - |
| Maximum build size (WxDxH) | 295 x 195 x 165 mm |
| Filament thickness supported | 1.75 mm |
| Control type | Touch |
| Product color | Black |
| Viewing window | Yes |
| Housing material | Acrylonitrile butadiene styrene (ABS), Aluminium, Steel |
| Display technology | LCD |
| Model file formats supported | makerbot, obj, stl |
| Storage temperature (T-T) | 0 - 38 °C |
| Operating temperature (T-T) | 15 - 32 °C |
| Package depth | 524 mm |
| Package width | 616 mm |
| Package height | 579 mm |
| Package weight | 22800 g |
| Bundled software | MakerBot Print Software, MakerBot Mobile |
| Mac operating systems supported | Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.9 Mavericks |
| Windows operating systems supported | Windows 10 Education, Windows 10 Education x64, Windows 10 Enterprise, Windows 10 Enterprise x64, Windows 10 Home, Windows 10 Home x64, Windows 10 Pro, Windows 10 Pro x64, Windows 7 Enterprise, Windows 7 Enterprise x64, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64 |
| Input current | 0.76 A |
| AC input voltage | 100-240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 100 W |
| Card reader integrated | No |
Weight and Dimensions| Depth | 441 mm |
|---|---|
| Width | 528 mm |
| Height | 410 mm |
| Weight | 16000 g |
To Next Page
