MAKERGEAR M2 - Page 11

9
4
Import "MGkey1.stl" and "MGkey2.stl" into your slic3r, and
arrange them on the bed to mimic the sample print
included with your M2E Dual. Double-click one of the two
models to bring up its properties, and select "Extruder 2"
for that model, to have it print with the second (Tool 1)
Extruder. Slice the plate (click "Export G-code..."), and
then name it "myMGkey.g". Transfer this new .g file to
your SD card, eject the card from your computer, and then
insert it back into the card reader on your printer.
Use your printer control software (e.g., Printrun by
Pronterface, available at
http://www.pronterface.com/#download) to instruct your
M2 to print "myMGkey.g" from your SD card.
If this print does not have similar strength and appearance
to the sample print included with your M2e Dual,
reference the online resources offered by your slicing
software provider in order to familiarize yourself with
different slicing settings' impact on various aspects of print
quality. If you experience persistent issues, you can always
contact MakerGear Support via
www.MakerGear.com/support.
*
5