Makita 3706 - MAINTENANCE

11
Connecting to Makita vacuum cleaner or dust
collector
Connect the hose of a vacuum cleaner/dust collector to the
dust nozzle. When connecting to Makita vacuum cleaner, an
optional hose 28 mm (1-1/8”) in inner diameter is necessary.
When connecting to Makita dust collector, connect the hose
for the dust collector directly to the dust nozzle.
MAINTENANCE
CAUTION:
• Always be sure that the tool is switched off and
unplugged before attempting to perform inspection or
maintenance.
To maintain product SAFETY and RELIABILITY, repairs, any
other maintenance or adjustment should be performed by
Makita Authorized or Factory Service Centers, always using
Makita replacement parts.
1. Vacuum cover
2. Hose 28
3. Hose for vacuum cleaner
001639
1
2
3
1. Vacuum cover
2. Hose 28
3. Dust collector
001640
1
2
3