Need help?Do you have a question about the Makita 4340CT and is the answer not in the manual?
General| Type | Jigsaw |
|---|---|
| Power Source | Corded |
| Voltage | 120V |
| Amperage | 6.3A |
| Cutting Capacity (steel at 90°) | 3/8" |
| Power Input | 750W |
| Orbital Settings | 3 |
| Dust Extraction | Yes |
| Stroke Length | 1 inch |
| No Load Speed | 500 - 3, 100 SPM |
| Bevel Capacity | 45° |
Explains icons and symbols used on the equipment for proper understanding.
Details the tool's intended applications and electrical connection requirements.
Provides noise and vibration levels for European countries and safety advice.
States compliance with relevant European directives and standards.
Guidelines for maintaining a safe and clear work environment.
Precautions to prevent electric shock and hazards related to power.
Measures for user protection, including alertness and proper attire.
Safe practices for operating, adjusting, and maintaining the power tool.
Securing workpieces, using PPE, and avoiding hazards like nails.
Ensuring proper tool control, hand placement, and blade management.
Handling hot parts and protecting against dust inhalation.
Explanation of orbital vs. straight cutting actions and their applications.
How to operate the trigger switch for starting, stopping, and continuous use.
Using the speed adjusting dial for optimal cutting performance on different materials.
Details on how to operate the built-in light for model 4340FCT.
Guide on securely installing and safely removing the saw blade.
Information on where to store the hex wrench when not in use.
How to hold the tool, start, and move it for cutting.
Adjusting the base to perform angled cuts between 0° and 45°.
Procedure for performing flush cuts by adjusting the tool base position.
Methods for cutouts, finishing edges, and metal cutting with specific precautions.
Instructions for dust collection and using the rip fence for straight cuts.
Using the rip fence for circular cuts and guide rail adapter for precise cuts.
Installing guide rail adapters for parallel cuts and cover plates for surface protection.
Using the anti-splintering device for clean cuts and its limitations.
To Next Page
