To Next PageTo Next Page
Need help?Do you have a question about the Makita 5007F and is the answer not in the manual?
General| Blade Diameter | 7-1/4 inches |
|---|---|
| Amperage | 15 amps |
| No Load Speed | 5, 800 RPM |
| Bevel Capacity | 0° - 45° |
| Power Source | Corded |
| Weight | 11.1 lbs |
| Arbor | 5/8 inches |
| Max Cutting Capacity at 90° | 2-3/8 inches |
| Voltage | 120V |
| Electric Brake | Yes |
| Max Cutting Capacity at 45° | 1-3/4 inches |
| Cord Length | 8 feet |
Safety practices concerning the work environment and electrical connections.
Operator alertness, proper attire, and safe tool operation and care.
Guidelines for tool servicing and selecting appropriate extension cords.
Essential safety checks for the lower guard and general operation.
Preventing kickback, managing blade binding, and proper blade maintenance.
Proper methods for supporting workpieces and safe handling of the saw.
Safety regarding coasting blades and potential chemical exposure.
Setting depth, bevel angles, and aligning the saw for accurate cuts.
Operation of switch/lamp and procedures for blade installation/removal.
How to use the rip fence and adjust for accurate 90° cuts.
Procedure for checking and replacing worn carbon brushes.
