Need help?Do you have a question about the Makita 5604R and is the answer not in the manual?
General| Input power | 950 W |
|---|---|
| Cable length | 2.5 m |
| Power source | AC |
| AC input voltage | 230 V |
| Blade diameter | 165 mm |
| Idle speed (max) | 5000 RPM |
| Cutting depth (45º) | 35 mm |
| Cutting depth (90º) | 54 mm |
| Noise level | 93 dB |
Weight and Dimensions| Depth | 320 mm |
|---|---|
| Width | 243 mm |
| Height | 235 mm |
| Weight | 3600 g |
Explains symbols for reading the manual and identifies double insulation.
Covers maintaining a clean work area, environmental considerations, and personal protection.
Guidelines on proper tool usage, cord care, and maintenance.
Rules for using correct blades, avoiding damage, and preventing kickback.
Procedures for removing, installing, and adjusting saw blades and guards.
Instructions on setting the depth of cut and making bevel adjustments.
Guidance on switch operation, workpiece support, and using the guide rule.
Guidance on general maintenance and replacing worn carbon brushes.
Details on noise and vibration levels and EC Declaration of Conformity.
To Next Page
