Need help?Do you have a question about the Makita 5477NB and is the answer not in the manual?
General| Model | 5477NB |
|---|---|
| Category | Saw |
| Type | Circular Saw |
| Power Source | Corded Electric |
| No Load Speed | 5, 800 RPM |
| Bevel Capacity | 0° - 45° |
| Voltage | 120 V |
| Cord Length | 8 ft |
| Weight | 10.1 lbs |
| Electric Brake | No |
| Spindle Lock | Yes |
| Blade Diameter | 7-1/4 inches |
| Arbor | 5/8 inches |
| Max Cutting Capacity at 45° | 1-3/4 inches |
| Motor Power | 15 Amps |
| Amperage | 15 Amps |
Keep the work area clean, well lit, and free of hazards.
Follow guidelines for safe electrical connections and usage.
Stay alert, use PPE, prevent accidental start, and dress appropriately.
Use correctly, maintain sharpness, and disconnect power before adjustments.
Ensure service by qualified personnel and keep parts maintained.
Follow safe practices for cutting, depth adjustment, and workpiece support.
Set the cutting depth so no more than one blade tooth projects below.
Adjust the bevel scale plate for desired angles (0° - 51.5°).
Hold the tool firmly with both hands, move forward smoothly.
Adjust 90° and 45° settings using hex wrench and a square rule.
Check and replace carbon brushes regularly when worn to the limit mark.
Use recommended accessories for safety and proper tool function.
To Next Page
