To Next PageTo Next Page
Need help?Do you have a question about the Makita DBM230 and is the answer not in the manual?
General| Product color | Black, Blue |
|---|---|
| Power protection features | Overload |
| Input power | 2500 W |
| Power source | AC |
| Rated speed (max) | 1250 RPM |
| Drilling diameter in concrete (max) | - mm |
Weight and Dimensions| Weight | 11200 g |
|---|
Instruction to wear hearing protection.
Instruction to wear eye protection.
Instruction to wear head protection.
Instruction to wear hand protection.
Instruction to wear foot protection.
Critical safety step before maintenance.
Requirement for qualified operators.
Importance of following manual guidance.
Procedure for dealing with damaged power cords.
Verifying absence of pipes/wires before drilling.
Environments and situations to avoid for safe operation.
Rules for tool operation and disconnection.
Procedures for unexpected shutdowns and damage.
Regular inspections and water management.
Safety for overhead work and restarting the tool.
Mandated PPE and avoidance of moving parts.
Required PPE for all present during operation.
Guidelines for using the GFCI safety switch.
Ensuring diamond segments are cooled properly.
Caution against using force for gear changes.
Prohibition of using tools for gear changes.
Warning about burns and crushing during bit changes.
Essential safety step before changing bits.
Warning against damaging the tool by hammering.
Preventing strikes on pipes or power lines.
Ensuring the stand is securely mounted.
Warning about ensuring the stand is firmly attached.
Risks associated with unstable drilling.
Care needed during overhead operations.
Indicators of encountering rebar during drilling.
Procedure for overcoming rebar obstruction.
Mechanical, electronic, and thermal protection systems.
How the slip clutch prevents motor damage.
Absorbing shocks and excessive loads.
Proper procedure to avoid damaging the clutch.
Steps to take when a segment or bit jams.
Why not to use an identical bit for replacement.
Warning against damaging the bit or core.
Essential safety step before any work.
Possible causes and solutions for non-operation.
Diagnosing issues when the motor runs but bit is static.
Causes and fixes for reduced drilling performance.
Troubleshooting unexpected motor shutdowns.
Identifying and resolving leaks from the housing.
