Need help?Do you have a question about the Makita DDF481 and is the answer not in the manual?
General| Voltage | 18V |
|---|---|
| Max Torque | 115 Nm |
| Speed Settings | 2 |
| No Load Speed (Low) | 0-550 rpm |
| No Load Speed (High) | 0-2, 100 rpm |
| Chuck Capacity | 1.5 - 13 mm |
| Max. in steel | 13 mm |
| Max. in wood | 76 mm |
| Battery Type | Li-ion |
| Length | 205 mm |
Ensures a safe operating environment by keeping the work area clean and preventing distractions.
Details precautions to prevent electric shock, including proper plug usage and avoiding grounded surfaces.
Advises users to stay alert, use PPE, and prevent unintentional starting for personal protection.
Provides guidelines for safe charging, storage, and handling of battery packs to prevent fire and injury.
Specific safety instructions for operating the cordless driver drill, focusing on handling and potential hazards.
Explains the meaning of various symbols used in the manual for tool operation and safety.
Crucial safety guidelines for handling, charging, and storing battery cartridges to prevent hazards.
Offers advice on proper charging and usage to extend the lifespan and performance of the battery.
Step-by-step guide on how to safely insert and remove the battery pack from the tool.
Explains the automatic power cut-off system in lithium-ion batteries to protect against overload and extend life.
Details how to check the battery charge level using indicator lamps and a check button.
Describes how to operate the switch trigger for tool activation, speed control, and lamp illumination.
Explains how to use the reversing switch to change rotation direction and set it to neutral.
Instructions on how to adjust the tool's speed setting using the speed change lever.
Guide on choosing the correct operating mode (drilling, screwing) by adjusting the action mode ring.
Details on how to set the desired torque level using the adjusting ring for screw driving operations.
Procedure for driving screws, including adjusting torque and starting the tool.
Guidance on performing drilling tasks, including drilling in wood and metal.
Instructions for attaching the side grip for improved stability and control during operation.
Guide on how to insert and remove drill bits and driver bits from the chuck.
Instructions for attaching the bit holder to the tool for convenient storage of bits.
Lists recommended accessories and attachments for use with the tool, emphasizing proper usage.
Details the warranty policy, coverage, exclusions, and limitations for the product.
Alerts users about potential exposure to chemicals known to cause cancer or reproductive harm in California.
To Next Page
