To Next PageTo Next Page
Need help?Do you have a question about the Makita DDF486Z and is the answer not in the manual?
General| Number of gears | 2 |
|---|---|
| Torque settings | 21 |
| Idle speed (max) | 2100 RPM |
| Idle speed (min) | 550 RPM |
| Chuck capacity (max) | 13 mm |
| Chuck capacity (min) | 1.5 mm |
| Sound pressure level | 74 dB |
| Sound level uncertainty | 3 dB |
| Drilling diameter in wood (max) | 50 mm |
| Maximum torque (hard applications) | 130 N⋅m |
| Maximum torque (soft applications) | 65 N⋅m |
| Drilling diameter in concrete (max) | - mm |
| Power source | Battery |
| Battery voltage | 18 V |
| Product color | Black, Blue |
| Screwdriving | - |
| Built-in light | Yes |
| Product design | Pistol grip drill |
| Hammer drilling | No |
Weight and Dimensions| Depth | 178 mm |
|---|---|
| Width | 81 mm |
| Height | 217 mm |
| Weight | 2600 g |
Provides essential safety rules for all power tools.
Covers general safe operating practices for the tool.
Advises on safe practices when using long drill bits.
System that cuts power if the tool draws excessive current.
System that stops the tool if it or the battery overheats.
System that activates when battery capacity is low.
Setting the torque level for screwdriving operations.
