To Next PageTo Next Page
Need help?Do you have a question about the Makita DDF482Z and is the answer not in the manual?
General| Soft grip | Yes |
|---|---|
| Chuck type | Keyless |
| Product design | Pistol grip drill |
| Number of gears | 2 |
| Torque settings | 21 |
| Chuck capacity (max) | 13 mm |
| Chuck capacity (min) | 1.5 mm |
| Idle speed (1st gear) | 600 RPM |
| Idle speed (2nd gear) | 1900 RPM |
| Drilling diameter in wood (max) | 38 mm |
| Maximum torque (hard applications) | 62 N⋅m |
| Maximum torque (soft applications) | 36 N⋅m |
| Product color | Black, Blue |
| Power source | Battery |
| Battery voltage | 18 V |
| Carrying case | No |
Weight and Dimensions| Depth | 185 mm |
|---|---|
| Width | 79 mm |
| Height | 249 mm |
| Weight | 1500 g |
Specifies the tool's purpose for drilling and screw driving in various materials.
Details sound pressure levels and warnings for hearing protection.
Provides vibration emission values for metal drilling and safety notes.
States compliance with European directives and relevant standards.
Guidance on charging, usage, and storage to extend battery lifespan.
Step-by-step guide on how to insert and detach the battery pack.
Explains automatic power cut-off for overload or low battery voltage.
Details how to check the battery charge level using indicator lamps.
Describes how to start, stop, and control speed using the switch trigger.
Explains how the LED lamp illuminates when the trigger is pressed.
Instructions for inserting and removing drill bits or driver bits from the chuck.
How to attach the hanging hook to the tool housing.
Guide for fitting the optional driver bit holder onto the tool.
Steps and precautions for driving screws, including torque adjustment.
Guidance on performing drilling tasks in wood and metal, including speed settings.
Detailed steps for checking and replacing worn carbon brushes.
