To Next PageTo Next Page
Need help?Do you have a question about the Makita DDF482RFJ and is the answer not in the manual?
General| Number of gears | 2 |
|---|---|
| Chuck capacity (max) | 13 mm |
| Chuck capacity (min) | 1.5 mm |
| Idle speed (1st gear) | 600 RPM |
| Idle speed (2nd gear) | 1900 RPM |
| Drilling diameter in wood (max) | 38 mm |
| Maximum torque (hard applications) | 36 N⋅m |
| Maximum torque (soft applications) | 62 N⋅m |
| Product color | Black, Blue |
| Built-in light | Yes |
| Product design | Pistol grip drill |
| Number of batteries included | 2 pc(s) |
| Power source | Battery |
| Battery voltage | 18 V |
Weight and Dimensions| Depth | 185 mm |
|---|---|
| Width | 79 mm |
| Height | 249 mm |
| Weight | 1500 g |
The tool is intended for drilling and screw driving in wood, metal and plastic.
The typical A-weighted noise level determined according to EN60745.
The vibration total value (tri-axial vector sum) determined according to EN60745.
Safety warnings specific to the cordless driver drill operation.
Essential safety guidelines for handling and using the battery cartridge.
Step-by-step instructions for inserting and removing the battery cartridge.
Explanation of the system that protects the battery and tool.
How to check the remaining charge on the battery cartridge.
Description of how the switch trigger operates the tool.
Instructions on how to use the LED work light.
Procedure for inserting and removing drill bits and driver bits.
How to attach the belt hook for temporary hanging.
Guide for installing the optional driver bit holder.
Detailed steps for performing screwdriving tasks effectively.
Instructions for performing drilling tasks in various materials.
Instructions for checking and replacing worn carbon brushes.
