Need help?Do you have a question about the Makita DDF482RMJ and is the answer not in the manual?
General| Model | DDF482RMJ |
|---|---|
| Category | Drill |
| Type | Cordless Drill Driver |
| Voltage | 18V |
| Battery Type | Lithium-ion |
| Chuck Size | 13 mm |
| Chuck Capacity | 1.5 - 13 mm |
| No Load Speed (Hi) | 1, 900 rpm |
| Max Torque | 62 Nm |
| Max Torque (S/H) | 42 Nm |
| Torque Settings | 21 + drill |
| Max. in steel | 13 mm |
| Max. in wood | 38 mm |
The tool is intended for drilling and screw driving in wood, metal and plastic.
Safety advice regarding noise exposure and vibration levels.
Critical safety rules for handling and using battery cartridges.
How to use the reversing switch for forward and reverse rotation.
How to adjust the fastening torque and a guide for screw sizes.
Guidance on proper torque adjustment and screw driving technique.
Steps for performing drilling operations in wood and metal.
Step-by-step guide for replacing worn carbon brushes.
To Next Page
