To Next PageTo Next Page
Need help?Do you have a question about the Makita DDF485Z and is the answer not in the manual?
General| Drilling | Yes |
|---|---|
| Chuck type | Keyless |
| Motor type | Brushless |
| Product design | Pistol grip drill |
| Hammer drilling | - |
| Number of gears | 2 |
| Idle speed (max) | 1900 RPM |
| Idle speed (min) | 0 RPM |
| Sound power level | 74 dB |
| Chuck capacity (max) | 13 mm |
| Chuck capacity (min) | 1.5 mm |
| Idle speed (1st gear) | 500 RPM |
| Drilling diameter in wood (max) | 38 mm |
| Maximum torque (hard applications) | 50 N⋅m |
| Maximum torque (soft applications) | 27 N⋅m |
| Drilling diameter in concrete (max) | - mm |
| Power source | Battery |
| Battery voltage | 18 V |
| Product color | Black, Blue |
Weight and Dimensions| Depth | 169 mm |
|---|---|
| Width | 79 mm |
| Height | 255 mm |
| Weight | 1700 g |
Tool for drilling and screw driving in wood, metal, and plastic.
Typical A-weighted noise level and warning to wear ear protection.
Declared vibration emission value for drilling into metal, with notes on measurement.
For European countries, declaration of conformity is included as Annex A.
Read all warnings, failure to follow may result in injury, shock, or fire.
Safety rules for using the cordless driver drill, including auxiliary handles and grip.
Crucial safety instructions for handling, storing, and using battery cartridges.
Recommendations for optimal charging and storage to maximize battery lifespan.
Step-by-step guide for inserting and removing the battery cartridge.
How to check the battery charge level using indicator lamps.
Explains overload, overheat, and overdischarge protection for tool and battery.
Details on how to operate the switch trigger for speed control and stopping.
Instructions for using the LED lamp and its behavior when the tool overheats.
How to change the tool's rotation direction using the reversing switch lever.
Guide on adjusting the speed using the speed change lever for different operations.
Explanation of how to adjust the clutch torque for various fastening applications.
Instructions for attaching the hook for temporary hanging of the tool.
Guide on how to attach the optional driver bit holder.
Steps for performing screwdriving tasks, including torque adjustment.
Guidance on performing drilling in wood and metal, including surface preparation.
Precautions and advice for maintaining the tool's safety and reliability.
List of recommended accessories and attachments for the tool.
