To Next PageTo Next Page
Need help?Do you have a question about the Makita DDF485RTJ and is the answer not in the manual?
General| Drilling | Yes |
|---|---|
| Chuck type | Keyless |
| Built-in light | No |
| Product design | Pistol grip drill |
| Number of gears | - |
| Torque settings | 21 |
| Idle speed (max) | 1900 RPM |
| Idle speed (min) | 500 RPM |
| Chuck capacity (max) | 13 mm |
| Chuck capacity (min) | 1.5 mm |
| Sound pressure level | 74 dB |
| Drilling diameter in wood (max) | 38 mm |
| Drilling diameter in concrete (max) | - mm |
| Power source | Battery |
| Battery voltage | 18 V |
Weight and Dimensions| Depth | 169 mm |
|---|---|
| Width | 79 mm |
| Height | 255 mm |
| Weight | 1700 g |
Lists compatible battery models and warns against using others.
Describes the tool's purpose for drilling and screw driving.
Details noise level specifications and recommends hearing protection.
Explains vibration emission values and measurement methods.
Provides essential safety instructions for operating power tools.
Essential safety precautions for using cordless driver drills.
Crucial safety guidelines for handling and using battery cartridges.
Advice on charging and caring for batteries to ensure longevity.
Instructions for inserting and removing the battery cartridge safely.
How to check the battery charge level using indicator lamps.
Explanation of automatic power cut-off features for tool and battery protection.
How to operate the switch trigger for starting, stopping, and speed control.
Details on how the LED lamp operates during use and after stopping.
How to use the reversing switch lever to change rotation direction.
Guide to changing the tool's speed setting using the speed change lever.
How to set the fastening torque using the adjusting ring and graduations.
Steps for inserting and removing drill bits and driver bits from the chuck.
Instructions for attaching the belt hook to the tool housing.
Instructions for fitting the driver bit holder onto the tool.
Guidance for performing screw driving tasks with the tool.
Instructions for performing drilling tasks in wood and metal.
Guidelines for tool maintenance and authorized repair services.
List of recommended accessories for use with the tool.
