To Next PageTo Next Page
Need help?Do you have a question about the Makita DDF486 and is the answer not in the manual?
General| Voltage | 18V |
|---|---|
| Max Torque | 130 Nm |
| No Load Speed (Low) | 0 - 550 RPM |
| No Load Speed (High) | 0 - 2, 100 RPM |
| Chuck Capacity | 1.5 - 13 mm |
| Max. in steel | 13 mm |
| Max. in wood | 76 mm |
| Max. Fastening Torque (Soft) | 65 Nm |
| Max. Fastening Torque (Hard) | 130 Nm |
| Battery Type | Li-ion |
| Length | 178 mm |
| Torque Settings S/H | 21/21 |
| Net weight | 2.3 kg |
