To Next PageTo Next Page
Need help?Do you have a question about the Makita DDF487 and is the answer not in the manual?
General| Voltage | 18V |
|---|---|
| Chuck Capacity | 1.5 - 13 mm |
| Weight | 1.7 kg |
| Max. Drilling Capacity (Steel) | 13 mm |
| Max. Drilling Capacity (Wood) | 36 mm |
| Battery Type | Li-ion |
Lists compatible battery cartridges and chargers for the tool.
Describes the primary purposes for which the tool is designed.
Details the typical A-weighted noise levels and related warnings.
Provides vibration data and safety considerations for its use.
Essential safety precautions applicable to all power tools.
Crucial safety guidelines for handling and using battery cartridges.
Safety advice specific to the cordless driver drill operation.
Recommendations for prolonging the battery cartridge's service life.
Step-by-step guide on how to insert and remove the battery.
Explains how to check the current battery charge level.
Describes the automatic safety cut-off features for tool and battery protection.
Details on how to operate the tool's switch trigger for starting and stopping.
Information about the electric brake function for quick stopping.
Instructions on how to activate and use the tool's built-in lamp.
How to control the drill's rotation direction using the reversing switch.
Instructions for adjusting the tool's speed settings.
How to set the appropriate torque for driving screws.
Guide on inserting and removing drill bits and driver bits.
Steps for attaching the belt hook to the tool.
Information on the purpose and use of the hanging hole.
How to install the optional driver bit holder.
Detailed steps for performing screwdriving tasks effectively.
Guidance on how to perform drilling operations in various materials.
Instructions for using the tool in a manual screwdriver mode.
