To Next PageTo Next Page
Need help?Do you have a question about the Makita DDF489Z and is the answer not in the manual?
General| Model | DDF489Z |
|---|---|
| Category | Drill |
| Type | Cordless |
| Voltage | 18V |
| Battery Type | Lithium-ion |
| Chuck Capacity | 1.5 - 13 mm |
| Max. in steel | 13 mm |
| Max. in wood | 38 mm |
| Torque Settings | 21 + drill |
| Chuck Size | 13 mm |
| No Load Speed (Hi) | 2000 rpm |
| No Load Speed (Lo) | 550 rpm |
| Max Torque | 60 Nm |
Detailed technical specifications of the DDF489 model, including capacities and performance metrics.
Defines the primary applications for the tool, such as drilling and screw driving.
Information on sound pressure and power levels determined according to EN62841-2-1.
Details on vibration emission levels determined according to EN62841-2-1 for metal drilling.
Essential safety guidelines applicable to all power tools, including warnings about electric shock and injury.
Specific safety precautions for cordless driver drills, focusing on handling and usage.
Formal statements of compliance included for European countries.
Critical safety advice for handling Makita battery cartridges, covering storage, charging, and disposal.
Recommendations for extending battery lifespan, including charging and storage practices.
Overview of the tool's main functional components and features.
Step-by-step guide for battery insertion and removal, including safety precautions.
How to check the battery level using indicator lamps on compatible battery cartridges.
Explains protection against overload, overheat, and overdischarge to extend tool and battery life.
Details on how to operate the switch trigger for starting, stopping, and speed control.
Information on the tool's electric braking mechanism for quick stopping.
Instructions for using the integrated front work light and its behavior.
How to change the tool's rotation direction using the reversing switch lever.
Guide to selecting between high and low speed settings using the speed change lever.
How to select between drilling and screwdriving modes using the adjusting ring.
Guide to setting the desired torque level for screws using the adjusting ring.
Steps for inserting and removing drill bits and driver bits into the chuck.
How to attach the side grip for better stability and control during operation.
Instructions for attaching the tool hook for temporary hanging.
Guidance on using the hanging hole at the bottom rear of the tool.
Guide for attaching the driver bit holder to the tool's foot.
Detailed steps for performing screwdriving tasks, including torque adjustment.
Guidance on performing drilling tasks in wood and metal, including best practices.
List of recommended accessories and attachments for the tool.
Instructions for tool care, upkeep, and recommended service procedures.
