To Next PageTo Next Page
Need help?Do you have a question about the Makita DDF482RFEB and is the answer not in the manual?
Defines the tool's purpose for drilling and screw driving in wood, metal, and plastic.
Details A-weighted noise levels and safety precautions for hearing protection.
Provides vibration emission values for drilling into metal and safety advice.
States compliance with European Directives for the DDF482 model.
Read all safety warnings and instructions; failure may result in injury.
Specific safety precautions for operating cordless driver drills.
Crucial guidelines for handling batteries and tips for maximum battery life.
Guides on correctly installing and removing the battery cartridge from the tool.
Explains how to check the remaining battery charge using indicator lamps.
Describes the system that stops the tool due to overload or low battery voltage.
Details how to operate the switch trigger and the front lamp.
How to change the tool's rotation direction using the reversing switch.
Instructions for adjusting the tool's speed using the speed change lever.
Steps for setting the torque clutch for different fastening applications.
Steps for performing screwdriving tasks with the tool.
Procedures for drilling holes in wood and metal materials.
Detailed steps for checking and replacing worn carbon brushes.
Defines the tool's purpose for drilling and screw driving in wood, metal, and plastic.
Details A-weighted noise levels and safety precautions for hearing protection.
Provides vibration emission values for drilling into metal and safety advice.
States compliance with European Directives for the DDF482 model.
Read all safety warnings and instructions; failure may result in injury.
Specific safety precautions for operating cordless driver drills.
Crucial guidelines for handling batteries and tips for maximum battery life.
Guides on correctly installing and removing the battery cartridge from the tool.
Explains how to check the remaining battery charge using indicator lamps.
Describes the system that stops the tool due to overload or low battery voltage.
Details how to operate the switch trigger and the front lamp.
How to change the tool's rotation direction using the reversing switch.
Instructions for adjusting the tool's speed using the speed change lever.
Steps for setting the torque clutch for different fastening applications.
Steps for performing screwdriving tasks with the tool.
Procedures for drilling holes in wood and metal materials.
Detailed steps for checking and replacing worn carbon brushes.
General| Model | DDF482RFEB |
|---|---|
| Category | Drill |
| Voltage | 18V |
| Battery Type | Li-ion |
| Chuck Capacity | 1.5 - 13 mm |
| No Load Speed (Hi) | 0 - 1, 900 rpm |
| No Load Speed (Lo) | 0 - 600 rpm |
| Max. in steel | 13 mm |
| Max. in wood | 38 mm |
| Type | Drill Driver |
| Chuck Size | 13mm |
