Why is my Makita DCS4610 hard to start when warm?
Warm start difficulties with your Makita Chainsaw are often caused by an incorrect carburetor adjustment. Adjusting the carburetor should resolve this issue.
Why does my Makita Chainsaw have insufficient power?
If your Makita Chainsaw has insufficient power, the possible causes include a dirty air filter, incorrect carburetor adjustment, a clogged muffler, or a blocked exhaust channel in the cylinder. To address this, you should clean or replace the air filter, adjust the carburetor, clean the muffler, and inspect the exhaust channel.
What to do if my Makita DCS4610 Chainsaw engine starts but dies immediately?
If your Makita Chainsaw engine starts and then immediately dies, it could be due to an incorrect idling adjustment or a dirty suction head or carburetor. You should adjust the idling and clean the suction head or carburetor.
What to do if my Makita DCS4610 Chainsaw chain does not run?
If the chain on your Makita Chainsaw isn't running, it's likely that the chain brake is engaged. Releasing the chain brake should solve this.
General| Engine displacement | 45.1 cm³ |
|---|---|
| Bar length | 40 cm (16") |
| Fuel tank capacity | 0.47 L |
| Chain pitch | 0.325 inches |
| Chain gauge | 0.050 inches |
Details intended uses, unauthorized users, general safety rules, and safe operation practices.
Outlines essential protective gear for head, eyes, hands, and feet for safe chainsaw operation.
Details safe fuel handling, refuelling procedures, storage, and transport of the chainsaw.
Explains kickback prevention techniques and provides essential first aid procedures.
Provides key performance data like stroke volume, power, speed, and sound levels.
Labels and describes all parts of the chainsaw for user reference.
Step-by-step guide for attaching the guide bar and saw chain to the chainsaw.
Instructions on adjusting chain tension and verifying chain brake functionality.
Covers fuel types, mixture ratios, chain lubrication, and engine start-up procedures.
Instructions on how to safely shut down the chainsaw engine.
Details on how to properly sharpen the saw chain and use filing tools.
Covers cleaning filters, guide bars, and replacing parts like spark plugs.
Outlines regular maintenance tasks and their recommended frequency.
Provides solutions for typical malfunctions like starting problems or lack of lubrication.
Information on authorized service, obtaining spare parts, and warranty terms.
A detailed list of available spare parts with corresponding part numbers.
Official statement confirming the chainsaw's compliance with applicable EU directives.
To Next Page
