Need help?Do you have a question about the Makita DHP481 and is the answer not in the manual?
General| Max Torque (Hard) | 115 Nm |
|---|---|
| Max Torque (Soft) | 60 Nm |
| Voltage | 18V |
| No Load Speed (High) | 0-2100 RPM |
| No Load Speed (Low) | 0-550 RPM |
| Chuck Capacity | 1.5 - 13 mm |
| Max. drilling diameter in masonry | 16 mm |
| Max. drilling diameter in steel | 13 mm |
| Max. drilling diameter in wood | 76 mm |
| Number of Gears | 2 |
| Battery Type | Li-ion |
| Blows per Minute (High) | 0 - 31500 ipm |
| Blows per Minute (Low) | 0-8, 250 BPM |
| Weight | 2.7 kg (with battery) |
To Next Page
